Using Selected Structural Indices to Pinpoint the Field Moisture Capacity of Some Coarse-Textured Agricultural Soils in Southeastern Nigeria
Article Sidebar
field moisture capacity,
saturated hydraulic conductivity,
structural stability,
water-conducting pores
Main Article Content
Abstract
Over- or underestimation of field capacity (FC) of agricultural soils could misguide soil and water management and this might have negative agronomic and environmental impacts. The study sought to identify the moisture tension for reliably estimating in the laboratory the FC of some sandy soils with low-activity clay minerals and at different levels of structure development in Nsukka agroecological zone in southeastern Nigeria. Fifty-four samples of topand subsoils under contrasting vegetation cover at three locations in the zone were analyzed for texture, organic
matter contents, bulk density and total porosity. Saturated hydraulic conductivities (Ksat) of the samples were equally
determined. Water-conducting and water-filled porosities at each of 0.06-, 0.10- and 0.33-bar tensions were implied from water retention data at the respective tensions. The soils were categorized based on their levels of structure development using a structural stability index [(organic matter: silt+clay) %] as follows: very low (< 4%), low (4-7.5%) and moderate to high (> 7.5%) stability soils. Series of simple correlation tests were run among the waterconducting porosities at the various tensions and the Ksat of the soils. In each case, the soil was assumed to have attained FC at that moisture tension which the associated water-conducting porosity showed significant positive correlation with the Ksat. Our results revealed that the 0.06-bar tension overestimated the FC of the soils. The 0.10-bar tension, the commonly used moisture tension for the purpose in the study area, proved suitable only for soils within the moderate to high structural stability category. From all indications, the 0.33-bar tension best corresponded to the FC of the less structurally developed soils in the other two categories. The level of soil structure development should therefore be considered before deciding the suitable moisture tension for the determination of FC of these and similar soils in other tropical locations.
Keywords: Coarse mineral soils, field moisture capacity, saturated hydraulic conductivity, structural stability,
water-conducting pores
Downloads
Article Details
License for Authors
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
License for Regular Users
Other regular users who want to cite, distribute, remix, tweak, and build upon author’s works, even for commercial purposes, should acknowledge the work’s authorship and initial publication in this journal, licensed under a Creative Commons Attribution License.